**Product Specifications**
Brand: Ona
Traditional eyeglass nose pads
Have you encountered the following problems with your glasses?
- Problem one
- Problem two
- Problem three
- Problem four
Nose pads are too hard, causing pain and red marks on the bridge of the nose
Made of rigid material, uncomfortable to wear, prone to yellowing and discoloration, and may cause allergies
Are you still enduring the pressure of plastic nose pads?
The new generation of silicone cushion nose pads will rescue your glasses
Our silicone cushion nose pads are soft, elastic, non-yellowing, and provide a better fit and comfort
Suitable for most eyeglasses, fitting the bridge of the nose securely to prevent slipping and pressure marks
Available in various sizes and types:
- Large airbag nose pad, screw lock type, approximately 15mm long and 7mm wide
- Medium airbag nose pad, screw lock type, approximately 14mm long and 7mm wide
- Airbag anti-slip nose pad, screw lock type, approximately 14mm long and 7mm wide
- Metal silicone nose pad, screw lock type, approximately 14mm long and 7mm wide
- Metal airbag nose pad, screw lock type, approximately 14mm long and 7mm wide
- Gold silicone nose pad, screw lock type, approximately 12.5mm long and 7mm wide
- Silver silicone nose pad, screw lock type, approximately 12.5mm long and 7mm wide
Note: Product parameters are measured manually, with an error margin of +1mm considered normal
Product usage instructions:
- Installation steps:
- Step 1: Cover the lenses with a glasses cloth to prevent scratching while unscrewing (turn left to loosen the screw)
- Step 2: Remove the old nose pads and screws, clean the metal nose pad support groove
- Step 3: Install the new nose pads and tighten the screws (turn right to tighten the screw)
Product display: DISPLAY
